Temporary Floor Protection – A Product Guide
Your floors want special protection when undergoing remodeling, during new building, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors as a way to make knowledgeable choices on the perfect product to use to your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These embody common adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as 48 mils thick).
(2) Products by the sheet: These embody corrugated plastic, masonite, and different rigid protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as four toes by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces however doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can often depart adhesive residue when removed. Widespread paper protection products include:
· A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.
· Kraft paper is a lightweight brown paper that is cheap but doesn’t afford any impact protection and can simply tear
· Scrim paper may incorporate coatings or reinforcements to make them waterproof as well as scrim threads to strengthen the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they’re additionally too thin to supply much impact protection.
· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.zero to 11.5 mils thick. The massive drawback of using Rosin paper is that it could cause a permanent stain if the paper gets wet. Rosin paper can even rip easily so it not normally recommended to be used
· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection however it shouldn’t be coated with a water-resistant finish and ought to be kept dry always so that it doesn’t disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films various from 2.zero up to 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not provide any impact protection and are normally rated for short time period use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in sustainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films can have a lower tack and colour than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the standard dimension of four feet by eight feet and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they’re bulky to hold and store. These wood sheets should be used on prime of a softer protection reminiscent of a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they forestall wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and will be harder to cut to dimension than different protection types.
If you beloved this write-up and you would like to obtain much more details concerning temporary carpet protection kindly visit the page.