Momentary Floor Protection - A Product Guide

Momentary Floor Protection – A Product Guide

By : | Comments Off on Momentary Floor Protection – A Product Guide | On : February 11, 2021 | Category : Uncategorized

Your floors want special protection when undergoing remodeling, throughout new building, moving heavy furniture or equipment, and for different events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost thousands of dollars in replacement and repair costs. This article describes surface protection products for floors so to make informed decisions on the best product to make use of to your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These embrace common adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These embrace corrugated plastic, masonite, and other rigid protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as 4 ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually depart adhesive residue when removed. Common paper protection products include:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that is inexpensive but doesn’t afford any impact protection and can easily tear

· Scrim paper could incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to strengthen the paper and forestall tearing. These improved papers are longer lasting than common Kraft paper or rosin paper however they are additionally too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The large drawback of using Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper may also rip simply so it not normally beneficial to be used

· Corrugated cardboard rolls or sheets can also be used to protect flooring. Corrugate provides impact protection nonetheless it just isn’t coated with a water-proof finish and should be kept dry always so that it does not disintegrate. Cardboard products are also available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero up to 3.5 mils in thickness. They trap any moisture from escaping so they shouldn’t be used on any floors that are curing. Two of the great benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t offer any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor selection in maintainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films can have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Each plywood and Masonite are sold in the usual dimension of four toes by eight ft and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on a wide range of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable however they’re bulky to carry and store. These wood sheets must be used on high of a softer protection reminiscent of a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t provide moisture protection and may be harder to cut to size than other protection types.

When you loved this informative article and you would love to receive more details about temporary carpet protection please visit the internet site.