Floor Protection - A Product Guide

Floor Protection – A Product Guide

By : | Comments Off on Floor Protection – A Product Guide | On : April 7, 2021 | Category : Uncategorized

Your floors want particular protection when undergoing remodeling, throughout new construction, moving heavy furniture or equipment, and for different events past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors so that you can make informed choices on the best product to make use of on your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective supplies bought by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and normally come as 4 feet by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces but doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can usually leave adhesive residue when removed. Frequent paper protection products include:

· Ramboard™ A coated compressed paper board 38 mils thick that’s breathable, water-resistant and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s inexpensive however doesn’t afford any impact protection and might easily tear

· Scrim paper may incorporate coatings or reinforcements to make them waterproof as well as scrim threads to reinforce the paper and stop tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper however they’re additionally too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and is very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of using Rosin paper is that it could cause a everlasting stain if the paper gets wet. Rosin paper can even rip simply so it not normally really helpful to be used

· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection nevertheless it is not coated with a water-resistant end and must be kept dry always in order that it doesn’t disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.zero up to 3.5 mils in thickness. They trap any moisture from escaping so they should not be used on any floors which can be curing. Two of the nice benefits of polyethylene films are that films will flex and contour to allow them to be used on carpets as well as hard surfaces. These films don’t offer any impact protection and are normally rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor selection in maintainable protection. Protection films are available in quite a lot of adhesion “tack”. Hard surface protection films could have a decrease tack and color than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with plenty of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Both plywood and Masonite are sold in the usual dimension of 4 toes by eight toes and are more expensive per square foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/four inch thick. Plywood is commonly 1/4 inch to three/four inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to carry and store. These wood sheets must be used on high of a softer protection akin to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and may be harder to chop to dimension than other protection types.

For those who have almost any questions concerning where as well as how you can work with correx, it is possible to e-mail us from the web-site.