Floor Protection – A Product Guide
Your floors need particular protection when undergoing remodeling, throughout new building, moving heavy furniture or equipment, and for different occasions past day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can value hundreds of dollars in replacement and repair costs. This article describes surface protection products for floors with the intention to make knowledgeable choices on the best product to use to your needs.
Types of Protection Packaging:
Floor protection products are commonly packaged as either:
(1) Products by the roll: These embody common adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick up to forty eight mils thick).
(2) Products by the sheet: These embrace corrugated plastic, masonite, and other rigid protection. Protective materials bought by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 toes by eight feet.
Type of Flooring Protection:
Paper protection is suitable for all hard surfaces and resilient surfaces however doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to secure them to flooring and tapes can usually go away adhesive residue when removed. Widespread paper protection products embrace:
· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, water-resistant and made from recycled paper.
· Kraft paper is a lightweight brown paper that is inexpensive however does not afford any impact protection and may easily tear
· Scrim paper may incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to reinforce the paper and stop tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nevertheless they’re also too thin to offer a lot impact protection.
· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The massive drawback of using Rosin paper is that it may cause a everlasting stain if the paper gets wet. Rosin paper also can rip simply so it not normally really helpful for use
· Corrugated cardboard rolls or sheets will also be used to protect flooring. Corrugate provides impact protection nevertheless it is not coated with a water-resistant end and ought to be kept dry at all times in order that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.
Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 up to 3.5 mils in thickness. They trap any moisture from escaping in order that they should not be used on any floors which are curing. Two of the good benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not supply any impact protection and are normally rated for short term use of 30 to ninety days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor choice in sustainable protection. Protection films are available in a wide range of adhesion “tack”. Hard surface protection films can have a decrease tack and color than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.
Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the standard measurement of four ft by eight toes and are more costly per square foot than paper or polyethylene products. Masonite is commonly 1/8 or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Each products provide impact protection on quite a lot of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nevertheless they are bulky to hold and store. These wood sheets must be used on prime of a softer protection such as a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite do not provide moisture protection and will be harder to cut to size than other protection types.
When you beloved this article along with you would want to get more details concerning correx kindly check out the web site.